THIS GUIDE REFERS TO THE FOLLOWING WHEELSETS:
- HUNT 42 Limitless Gravel Adventure Wheelset
- HUNT SUB50 Limitless Aero Disc Wheelset
- HUNT SUB50 Limitless UD Carbon Spoke Disc Wheelset
- HUNT 40 Carbon Gravel Race Wheelset
- HUNT Gravel Race Disc Wheelset (2024)
- HUNT Hill Climb SL Disc Tubular Wheelset
- HUNT 4 Season Pro Disc Wheelset
Need to order the parts featured in this guide? Head to our Spares page here. Our guide to using the Spares Finder is here.
- Remove the wheel from the bike and remove cassette if fitted.
- Pull the drive side end cap from the axle – no tools are required.
- With the freehub body, this simply slides off the axle. The H_Ratchet DBL is likely to stay in place within the hub body. Should it come out, please note the orientation in preparation for re-installing.
- To service the freehub mechanism, clean the H_Ratchet DBL and ratchet rings of the freehub body with a dry micro-fibre cloth and lubricate with a thin layer of lightweight grease on each surface.
- Fit the H_Ratchet DBL onto the drive side of the axle, with the sprung side facing outwards. Then slide the freehub of your choice on. You may have to turn the H_Ratchet DBL a little to slide into the ratchet ring teeth.
- Push the adaptor/end cap back on to the drive side of the axle. Please Note: if swapping from SRAM XD or SHIMANO HG to SHIMANO Microspline or vice versa the drive side end cap is specific to the freehub body.
- Ensure that the adaptors/end caps are fully pressed home to ensure proper fit and prevent any lateral play.